Product Introduction

Closed-loop stepper motor drive, high precision, low pulsation dispensing peristaltic pump.The low pulsation pump head is special for high precision fling.
Through the phase differencebetween the two sets of rollers, make the fluid peaks and valleys complementary, then reduce thepulsation of the fluid.
Adaptive pressure tubing space, extend the tubing lifetime effectively.
Achieving high precision dispensing of micro flow rate.
New flow rate mode, can be used for continuous transferring.
Can communicate with balance, closed-loop control.

Technical Parameter

Flow rate	2.25-12740mL/min
Speed range	0.1-350rpm
Speed resolution	0.01rpm
Dispensing volume range	0.01-9999.99mL
Dispensing volume resolution	0.01mL
Dispensing time	0.1-9999.99s
Pause time	0.1-9999.99s
Time resolution	0.01s
Copy numbers	1-9999 times, setting "0" means unlimited
Back suction angle	0-360°
Dispensing accuracy	<±0.5%
Motor type	Servo motor
Display	4.3-inch industrial-grade true color display
Control method	Touch screen and mechanical keypad
Keypad lifetime	300,000 times
Start/stop, direction signal	Passive switch signal (e.g. foot pedal switch); Active switch signal: 5-24V universal
Output interface	Motor working status output (open-collector output)
Communication interface	RS232, RS485 support Modbus protocol (RTU mode)
Power supply	220V±10% 50Hz/60Hz (standard); 110V±10% 50Hz/60Hz (optional)
Tube pressure	0.8-1.0mm wall thickness: 0.1MPa; 1.6-2.4mm wall thickness: 0.1-0.27MPa
Drive dimension	301270334mm (L×W×H)
Drive weight	15.7kg
Power consumption	<80W
Environment temperature	0-40℃
Relative humidity	<80%
IP rating	IP31